189 8069 5689
CentOS7的swap分区管理（分区或文件）
1、swap可以在安装操作系统的时候划分单独分区创建；也可以安装好操作系统后划分剩余硬盘创建；还可以创建一个文件当swap分区使用
2、建议创建一个新的分区当swap使用，如果想使用一个文件当swap分区用的话最好将文件放在固态硬盘上，使用文件充当swap的话可以随意变大变小，移动也方便，但性能不如分区好
创建分区来划分swap
一、使用free -h查看当前swap
当前系统有4G的swap空间
[root@centos7 ~]# free -h
total used free shared buff/cache available
Mem: 1.9G 180M 1.2G 19M 545M 1.6G
Swap: 4.0G 12M 4.0G
使用swapon -s显示当前系统的swap
[root@centos7 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-0 partition 419430012676 -2
二、使用lsblk查看当前系统的硬盘
可以看到，sda总共200G，现在才划分了150多G，还有可以用的空间
[root@centos7 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 200G 0 disk
├─sda1 8:1 0 1G 0 part /boot
├─sda2 8:2 0 100G 0 part /
├─sda3 8:3 0 50G 0 part /data
├─sda4 8:4 0 1K 0 part
└─sda5 8:5 0 4G 0 part
└─centos-swap
253:0 0 4G 0 lvm [SWAP]
sdb 8:16 0 20G 0 disk
└─sdb2 8:18 0 2G 0 part
三、使用fdisk对/dev/sda硬盘进行创建分区操作
[root@centos7 ~]# fdisk /dev/sda
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
All primary partitions are in use
Adding logical partition 6
First sector (35072896-419430399, default 325072896):
Using default value 325072896
Last sector, +sectors or +size{K,M,G} (325072896-419430399, default 419430399): +2G
Partition 6 of type Linux and of size 2 GiB is set
Command (m for help): p
Disk /dev/sda: 214.7 GB, 214748364800 bytes, 419430400 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000f14f7
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 211814399 104857600 83 Linux
/dev/sda3 211814400 316671999 52428800 83 Linux
/dev/sda4 316672000 419430399 51379200 5 Extended
/dev/sda5 316674048 325070847 4198400 8e Linux LVM
/dev/sda6 325072896 329267199 2097152 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
四、执行两下partprobe(CentOS6执行part /dev/sda -a)
[root@centos7 ~]# partprobe
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Invalid partition table - recursive partition on /dev/sr0.
Warning: Unable to open /dev/sr1 read-write (Read-only file system). /dev/sr1 has been opened read-only.
[root@centos7 ~]# partprobe
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: Invalid partition table - recursive partition on /dev/sr0.
Warning: Unable to open /dev/sr1 read-write (Read-only file system). /dev/sr1 has been opened read-only.
五、创建文件系统
[root@centos7 ~]# ls /dev/sda6
/dev/sda6
[root@centos7 ~]# mkswap /dev/sda6
Setting up swapspace version 1, size = 2097148 KiB
no label, UUID=b98996a2-a548-4266-b636-b2cb75cd0626
六、写入/etc/fstab，并mount -a测试
[root@centos7 ~]# blkid /dev/sda6
/dev/sda6: UUID="b98996a2-a548-4266-b636-b2cb75cd0626" TYPE="swap"
[root@centos7 ~]# vim /etc/fstab
[root@centos7 ~]# tail -1 /etc/fstab
UUID=b98996a2-a548-4266-b636-b2cb75cd0626 swap swap defaults 0 0
[root@centos7 ~]# mount -a
七、swapon -a
此时执行free -h，swap分区还没显示出来，执行swapon -a，启用所有swap
[root@centos7 ~]# free -h
total used free shared buff/cache available
Mem: 1.9G 176M 1.2G 19M 547M 1.6G
Swap: 4.0G 12M 4.0G
[root@centos7 ~]# swapon -a
[root@centos7 ~]# free -h
total used free shared buff/cache available
Mem: 1.9G 178M 1.2G 19M 547M 1.6G
Swap: 6.0G 12M 6.0G
八、卸载这个swap
[root@centos7 ~]# swapoff /dev/sda6
[root@centos7 ~]# sed -ri '$d' /etc/fstab
[root@centos7 ~]# mount -a
创建一个文件充当swap分区
一、使用dd命令创建一个文件100M，当swap用
[root@centos7 data]# dd if=/dev/zero of=/data/swapfile bs=1M count=100
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 2.74665 s, 38.2 MB/s
[root@centos7 data]# chmod 600 swapfile
二、对该文件创建文件系统
[root@centos7 data]# mkswap swapfile
Setting up swapspace version 1, size = 102396 KiB
no label, UUID=a16538e7-685e-4141-aaeb-e1b7896cffdf
三、写入/etc/fstab,挂载（这里要注意，挂载设备不能写UUID，只能写文件名）
[root@centos7 data]# tail -1 /etc/fstab
/data/swapfile swap swap defaults 0 0
[root@centos7 data]# mount -a
四、执行swapon -a 开启所有swap
[root@centos7 data]# swapon -a
[root@centos7 data]# swapon -s
Filename Type Size Used Priority
/dev/dm-0 partition 4194300 12672 -2
/data/swapfile file 102396 0 -3
[root@centos7 data]# free -h
total used free shared buff/cache available
Mem: 1.9G 176M 1.1G 19M 650M 1.6G
Swap: 4.1G 12M 4.1G
五、增大swap，需要先取消挂载
[root@centos7 data]# dd if=/dev/zero of=/data/swapfile bs=1M count=200
dd: failed to open ‘/data/swapfile’: Text file busy
[root@centos7 data]# swapoff /data/swapfile
[root@centos7 data]# dd if=/dev/zero of=/data/swapfile bs=1M count=200
200+0 records in
200+0 records out
209715200 bytes (210 MB) copied, 3.23377 s, 64.9 MB/s
[root@centos7 data]# mkswap swapfile
Setting up swapspace version 1, size = 204796 KiB
no label, UUID=79d0f287-c998-42d3-aabc-b3b2d60b9cb2
[root@centos7 data]# swapon -a
[root@centos7 data]# free -h
total used free shared buff/cache available
Mem: 1.9G 176M 1.0G 19M 752M 1.6G
Swap: 4.2G 12M 4.2G
六、卸载
[root@centos7 data]# swapoff /data/swapfile
[root@centos7 data]# sed -ri '$d' /etc/fstab
[root@centos7 data]# mount -a
[root@centos7 data]# rm -f swapfile
[root@centos7 data]# free -h
total used free shared buff/cache available
Mem: 1.9G 176M 1.2G 19M 547M 1.6G
Swap: 4.0G 12M 4.0G
另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。