KubernetesV1.12二进制部署多Master-创新互联

环境：

高可用环境架构：
Kubernetes V1.12 二进制部署多Master

创新互联云计算的互联网服务提供商,拥有超过13年的服务器租用、达州主机托管、云服务器、网络空间、网站系统开发经验，已先后获得国家工业和信息化部颁发的互联网数据中心业务许可证。专业提供云主机、网络空间、主机域名、VPS主机、云服务器、香港云服务器、免备案服务器等。

组件版本：

软件	版本
Linux操作系统	CentOS7.5_x64
Kubernetes	1.12
Docker	18.xx-ce
Etcd	3.x
Flannel	0.10

服务器角色：

角色	IP	组件
master01	192.168.1.43	kube-apiserver，kube-controller-manager，kube-scheduler etcd
master02	192.168.1.63	kube-apiserver，kube-controller-manager，kube-scheduler etcd
node01	192.168.1.30	kubelet，kube-proxy，docker，flannel，etcd
node02	192.168.1.51	kubelet，kube-proxy，docker，flannel
node03	192.168.1.141	kubelet，kube-proxy，docker，flannel
Load Balancer （Master）	192.168.1.31 192.168.1.230 (VIP)	Nginx L4
Load Balancer （Backup）	192.168.1.186	Nginx L4

自签SSL证书：

组件	使用的证书
etcd	ca.pem，server.pem，server-key.pem
flannel	ca.pem，server.pem，server-key.pem
kube-apiserver	ca.pem，server.pem，server-key.pem
kubelet	ca.pem，ca-key.pem
kube-proxy	ca.pem，kube-proxy.pem，kube-proxy-key.pem
kubectl	ca.pem，admin.pem，admin-key.pem

准备工作：

关闭防火墙：
# systemctl stop firewalld && systemctl disable firewalld
同步时间：(ssl验证时间)
# yum -y install ntpdate && ntpdate time.windows.com

1.部署ETCD集群

1.1安装cfssl

curl -L https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 -o /usr/local/bin/cfssl                #cfssl来生成证书
curl -L https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 -o /usr/local/bin/cfssljson        #cfssljson传入json文件生成证书
curl -L https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 -o /usr/local/bin/cfssl-certinfo      #cfssl-cetinfo查看生成证书信息
chmod +x /usr/local/bin/cfssl /usr/local/bin/cfssljson /usr/local/bin/cfssl-certinfo

1.2生成证书

# mkdir ~/k8s/etcd-cert -p
# cd ~/k8s/etcd-cert

ca根证书：

# cat > ca-config.json <

ca请求签名证书：

# cat > ca-csr.json <

为ETCD颁发ssl证书：（将etcd节点ip加入其中）

# cat > server-csr.json <

生成证书：

初始化ca根证书：
        cfssl gencert -initca ca-csr.json | cfssljson -bare ca -    #会生成ca-key.pem，ca.pem
生成证书：
        cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server     #会生成server-key，server
#说明：
        #-ca=ca.pem 指定ca
        #-ca-key=ca-key.pem 指定ca私钥
        #-config=ca-config.json 指定ca配置文件
        #-profile=www 应用配置文件中的www

`1.3ETCD数据库集群部署`

二进制包下载：https://github.com/etcd-io/etcd/releases

解压二进制包：

# cd ~/k8s
# tar -zxvf etcd-v3.3.10-linux-amd64.tar.gz
创建etcd目录：
# mkdir /opt/etcd/{cfg,bin,ssl} -p     #配置，可执行，证书目录

移动可执行文件到etcd目录：

# cd ~/k8s/etcd-v3.3.10-linux-amd64
# mv etcd etcdctl /opt/etcd/bin/
# ls /opt/etcd/bin/
    etcd  etcdctl

把刚生成的拷贝ssl文件到etc目录：

# cd ~/k8s/etcd-cert
# cp *pem 
# ls /opt/etcd/ssl/
    ca-key.pem  ca.pem  server-key.pem  server.pem

创建etcd配置文件：

# cat </opt/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd01"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.1.43:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.1.43:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.1.43:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.43:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.1.43:2380,etcd02=https://192.168.1.30:2380,etcd03=https://192.168.1.51:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
EOF

ETCD_NAME 节点名称
ETCD_DATA_DIR 数据目录
ETCD_LISTEN_PEER_URLS 集群通信监听地址
ETCD_LISTEN_CLIENT_URLS 客户端访问监听地址
ETCD_INITIAL_ADVERTISE_PEER_URLS 集群通告地址
ETCD_ADVERTISE_CLIENT_URLS 客户端通告地址
ETCD_INITIAL_CLUSTER 集群节点地址
ETCD_INITIAL_CLUSTER_TOKEN 集群Token
ETCD_INITIAL_CLUSTER_STATE 加入集群的当前状态，new是新集群，existing表示加入已有集群

创建systemctld管理文件：

# cat /usr/lib/systemd/system/etcd.service 
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/opt/etcd/cfg/etcd
ExecStart=/opt/etcd/bin/etcd \
--name=${ETCD_NAME} \
--data-dir=${ETCD_DATA_DIR} \
--listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \
--listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \
--advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \
--initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \
--initial-cluster=${ETCD_INITIAL_CLUSTER} \
--initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} \
--initial-cluster-state=new \
--cert-file=/opt/etcd/ssl/server.pem \
--key-file=/opt/etcd/ssl/server-key.pem \
--peer-cert-file=/opt/etcd/ssl/server.pem \
--peer-key-file=/opt/etcd/ssl/server-key.pem \
--trusted-ca-file=/opt/etcd/ssl/ca.pem \
--peer-trusted-ca-file=/opt/etcd/ssl/ca.pem
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

开机并启动etcd：

# systemctl daemon-reload && systemctl enable etcd && systemctl restart etcd

`1.4其他节点安装etcd`

拷贝etcd文件到node1，node2

# scp -r /opt/etcd/ root@192.168.1.30:/opt/
# scp -r /opt/etcd/ root@192.168.1.51:/opt/
# scp /usr/lib/systemd/system/etcd.service root@192.168.1.51:/usr/lib/systemd/system/
# scp /usr/lib/systemd/system/etcd.service root@192.168.1.30:/usr/lib/systemd/system/

修改配置文件

node1:
# cat /opt/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd02"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.1.30:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.1.30:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.1.30:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.30:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.1.43:2380,etcd02=https://192.168.1.30:2380,etcd03=https://192.168.1.51:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

node2:
# cat /opt/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd03"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.1.51:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.1.51:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.1.51:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.51:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.1.43:2380,etcd02=https://192.168.1.30:2380,etcd03=https://192.168.1.51:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

开机并启动etcd：
# systemctl daemon-reload && systemctl enable etcd && systemctl restart etcd

查看etcd集群状态：

# cd /root/k8s/etcd-cert
#  /opt/etcd/bin/etcdctl \
> --ca-file=ca.pem --cert-file=server.pem --key-file=server-key.pem \
> --endpoints="https://192.168.1.43:2379,https://192.168.1.30:2379,https://192.168.1.51:2379" \
> cluster-health

    member 8da171dbef9ded69 is healthy: got healthy result from https://192.168.1.51:2379
    member d250ef9d0d70c7c9 is healthy: got healthy result from https://192.168.1.30:2379
    member f3b3c9aa5b97cee8 is healthy: got healthy result from https://192.168.1.43:2379
    cluster is healthy

`2.在node安装docker`

# yum install -y yum-utils device-mapper-persistent-data lvm2     #安装依赖包 
# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo     #添加Docker软件包源 
# yum install -y docker-ce     #安装Docker CE 
# systemctl start docker && systemctl enable docker     #启动Docker服务并设置开机启动

`3.部署Flannel网络`

工作原理：

`3.1将flannel子网段写入etcd中，供flanneld使用：`

# cd /root/k8s/etcd-cert
# /opt/etcd/bin/etcdctl \
--ca-file=ca.pem --cert-file=server.pem --key-file=server-key.pem \
--endpoints="https://192.168.1.43:2379,https://192.168.1.30:2379,https://192.168.1.51:2379" \
set /coreos.com/network/config  '{ "Network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}'
    { "Network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}

`3.2部署Flannel（只部署到node节点）`

下载二进制包：https://github.com/coreos/flannel/releases

解压二进制包：
# tar -zxvf flannel-v0.10.0-linux-amd64.tar.gz
创建k8s目录
# mkdir /opt/kubernetes/{cfg,bin,ssl} -p
移动可执行文件到k8s目录
# mv flanneld mk-docker-opts.sh /opt/kubernetes/bin

创建flannel配置文件：

# cat </opt/kubernetes/cfg/flanneld
FLANNEL_OPTIONS="--etcd-endpoints=https://192.168.1.43:2379,https://192.168.1.30:2379,https://192.168.1.51:2379 \
-etcd-cafile=/opt/etcd/ssl/ca.pem \
-etcd-certfile=/opt/etcd/ssl/server.pem \
-etcd-keyfile=/opt/etcd/ssl/server-key.pem"
EOF

创建flannel system管理文件：

cat </usr/lib/systemd/system/flanneld.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service

[Service]
Type=notify
EnvironmentFile=/opt/kubernetes/cfg/flanneld
ExecStart=/opt/kubernetes/bin/flanneld --ip-masq \$FLANNEL_OPTIONS
ExecStartPost=/opt/kubernetes/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure

[Install]
WantedBy=multi-user.target

EOF

配置Docker启动指定子网段：

# vim /usr/lib/systemd/system/docker.service
EnvironmentFile=/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID

重启docker和flannel

# systemctl daemon-reload && systemctl start flanneld && systemctl enable flanneld
# systemctl restart docker

检查是否生效

# ps -ef |grep docker
    root      42770      1  0 12:41 ?        00:00:00 /usr/bin/dockerd --bip=172.17.75.1/24 --ip-masq=false --mtu=1450
# ip addr
3: flannel.1:  mtu 1450 qdisc noqueue state UNKNOWN group   default 
    link/ether ce:e0:c4:9f:7b:64 brd ff:ff:ff:ff:ff:ff
    inet 172.17.75.0/32 scope global flannel.1
       valid_lft forever preferred_lft forever
    inet6 fe80::cce0:c4ff:fe9f:7b64/64 scope link 
       valid_lft forever preferred_lft forever
4: docker0:  mtu 1500 qdisc noqueue state DOWN group default 
    link/ether 02:42:41:6d:53:ce brd ff:ff:ff:ff:ff:ff
    inet 172.17.75.1/24 brd 172.17.75.255 scope global docker0
       valid_lft forever preferred_lft forever

拷贝文件到其他节点：

scp -r /opt/kubernetes/ root@192.168.1.51:/opt
scp -r /usr/lib/systemd/system/{flanneld,docker}.service root@192.168.1.51:/usr/lib/systemd/system/

最后保证全网互通。

# docker run -it busybox sh
# ping 172.17.67.2

`4.在Master节点部署组件`

在部署Kubernetes之前一定要确保etcd、flannel、docker是正常工作的，否则先解决问题再继续。

`4.1生成证书`

创建ca证书：

创建目录：
# cd ~/k8s
# mkdir k8s-cert
# cd k8s-cert

# cat > ca-config.json < ca-csr.json <

生成api server证书（注意授权ip访问apiserver，高可用需要加入master ip，lb ip，VIP）

cat > server-csr.json <

生成kube-proxy证书

cat > kube-proxy-csr.json <

`4.2部署apiserver组件`

下载二进制包：https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.12.md 下载这个包（kubernetes-server-linux-amd64.tar.gz）就够了，包含了所需的所有组件。

# cd ~/k8s
# tar -zxvf kubernetes-server-linux-amd64.tar.gz
# cd ~/k8s/kubernetes/server/bin/
# cp kube-apiserver kube-scheduler kube-controller-manager kubectl /opt/kubernetes/bin/

创建token文件：

生成token：
# head -c 16 /dev/urandom | od -An -t x | tr -d ' '
# vim /opt/kubernetes/cfg/token.csv
    2f7a15198f7c0c3af3ba7f264b6885c2,kubelet-bootstrap,10001,"system:kubelet-bootstrap"

第一列：随机字符串，自己可生成第二列：用户名第三列：UID 第四列：用户组创建apiserver配置文件：（注意修改master地址，etcd服务）

cat </opt/kubernetes/cfg/kube-apiserver

KUBE_APISERVER_OPTS="--logtostderr=true \\
--v=4 \\
--etcd-servers=https://192.168.1.43:2379,https://192.168.1.30:2379,https://192.168.1.51:2379 \\
--bind-address=192.168.1.43 \\
--secure-port=6443 \\
--advertise-address=192.168.1.43 \\
--allow-privileged=true \\
--service-cluster-ip-range=10.0.0.0/24 \\
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,ResourceQuota,NodeRestriction \\
--authorization-mode=RBAC,Node \\
--kubelet-https=true \\
--enable-bootstrap-token-auth \\
--token-auth-file=/opt/kubernetes/cfg/token.csv \\
--service-node-port-range=30000-50000 \\
--tls-cert-file=/opt/kubernetes/ssl/server.pem  \\
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \\
--client-ca-file=/opt/kubernetes/ssl/ca.pem \\
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--etcd-cafile=/opt/etcd/ssl/ca.pem \\
--etcd-certfile=/opt/etcd/ssl/server.pem \\
--etcd-keyfile=/opt/etcd/ssl/server-key.pem"

EOF

配置好前面生成的证书，确保能连接etcd。

参数说明：

--logtostderr 启用日志
---v 日志等级
--etcd-servers etcd集群地址
--bind-address 监听地址
--secure-port https安全端口
--advertise-address 集群通告地址
--allow-privileged 启用授权
--service-cluster-ip-range Service虚拟IP地址段
--enable-admission-plugins 准入控制模块
--authorization-mode 认证授权，启用RBAC授权和节点自管理
--enable-bootstrap-token-auth 启用TLS bootstrap功能，后面会讲到
--token-auth-file token文件
--service-node-port-range Service Node类型默认分配端口范围

systemd管理apiserver：

cat </usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-apiserver
ExecStart=/opt/kubernetes/bin/kube-apiserver \$KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

启动

# systemctl daemon-reload && systemctl enable kube-apiserver && systemctl restart kube-apiserver
# ps -ef | grep kube-apiserver

`4.3部署kube-scheduler`

创建配置文件：

# cat </opt/kubernetes/cfg/kube-scheduler

KUBE_SCHEDULER_OPTS="--logtostderr=true \\
--v=4 \\
--master=127.0.0.1:8080 \\
--leader-elect"

EOF

参数说明：

--master 连接本地apiserver
--leader-elect 当该组件启动多个时，自动选举（HA）

创建systemd管理文件：

# cat </usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-scheduler
ExecStart=/opt/kubernetes/bin/kube-scheduler \$KUBE_SCHEDULER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

启动：

# systemctl daemon-reload  && systemctl enable kube-scheduler && systemctl restart kube-scheduler
# ps -ef | grep kube-scheduler

`4.4部署controller-manager组件`

创建controller-manager配置文件：

cat </opt/kubernetes/cfg/kube-controller-manager

KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=true \\
--v=4 \\
--master=127.0.0.1:8080 \\
--leader-elect=true \\
--address=127.0.0.1 \\
--service-cluster-ip-range=10.0.0.0/24 \\
--cluster-name=kubernetes \\
--cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \\
--cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem  \\
--root-ca-file=/opt/kubernetes/ssl/ca.pem \\
--service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--experimental-cluster-signing-duration=87600h0m0s"

EOF

systemd管理controller-manager组件：

cat </usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-controller-manager
ExecStart=/opt/kubernetes/bin/kube-controller-manager \$KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

启动

# systemctl daemon-reload && systemctl enable kube-controller-manager && systemctl restart kube-controller-manager
# ps -ef | grep kube-controller-manager

所有组件都已经启动成功，通过kubectl工具查看当前集群组件状态：

# /opt/kubernetes/bin/kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
scheduler            Healthy   ok                  
controller-manager   Healthy   ok                  
etcd-1               Healthy   {"health":"true"}   
etcd-0               Healthy   {"health":"true"}   
etcd-2               Healthy   {"health":"true"} 
如上输出说明组件都正常。

`5.部署node组件`

Master apiserver启用TLS认证后，Node节点kubelet组件想要加入集群，必须使用CA签发的有效证书才能与apiserver通信，当Node节点很多时，签署证书是一件很繁琐的事情，因此有了TLS Bootstrapping机制，kubelet会以一个低权限用户自动向apiserver申请证书，kubelet的证书由apiserver动态签署。

认证大致工作流程如图所示：

`5.1将kubelet-bootstrap用户绑定到系统集群角色（在master上）`

kubectl create clusterrolebinding kubelet-bootstrap \
  --clusterrole=system:node-bootstrapper \
  --user=kubelet-bootstrap

`5.2创建kubeconfig文件`

创建kubelet bootstrapping kubeconfig（在master上）

# cd ~/k8s
# mkdir kubeconfig
# cd kubeconfig/

设置kubectl环境变量：
# vi /etc/profile
# export PATH=$PATH:/opt/kubernetes/bin/
# source /etc/profile

# 设置集群参数
kubectl config set-cluster kubernetes \
  --certificate-authority=/root/k8s/k8s-cert/ca.pem \
  --embed-certs=true \
  --server=https://192.168.1.43:6443 \
  --kubeconfig=bootstrap.kubeconfig

# 设置客户端认证参数
kubectl config set-credentials kubelet-bootstrap \
  --token=2f7a15198f7c0c3af3ba7f264b6885c2 \
  --kubeconfig=bootstrap.kubeconfig

# 设置上下文参数
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kubelet-bootstrap \
  --kubeconfig=bootstrap.kubeconfig

# 设置默认上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig

创建kube-proxy kubeconfig文件:（在master上）

kubectl config set-cluster kubernetes \
  --certificate-authority=/root/k8s/k8s-cert/ca.pem \
  --embed-certs=true \
  --server=https://192.168.1.43:6443 \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-credentials kube-proxy \
  --client-certificate=/root/k8s/k8s-cert/kube-proxy.pem \
  --client-key=/root/k8s/k8s-cert/kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

# ls
    bootstrap.kubeconfig  kube-proxy.kubeconfig

拷贝配置文件到node

# scp kube-proxy.kubeconfig bootstrap.kubeconfig root@192.168.1.30:/opt/kubernetes/cfg/
# scp kube-proxy.kubeconfig bootstrap.kubeconfig root@192.168.1.51:/opt/kubernetes/cfg/

`5.3部署kubelet组件`

将前面下载的二进制包中的kubelet和kube-proxy拷贝到/opt/kubernetes/bin目录下。

# cd ~/k8s/kubernetes/server/bin
# scp kubelet  kube-proxy root@192.168.1.30:/opt/kubernetes/bin/
# scp kubelet  kube-proxy root@192.168.1.51:/opt/kubernetes/bin/

创建kubelet配置文件：

cat </opt/kubernetes/cfg/kubelet

KUBELET_OPTS="--logtostderr=true \\
--v=4 \\
--hostname-override=192.168.1.30 \\
--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \\
--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \\
--config=/opt/kubernetes/cfg/kubelet.config \\
--cert-dir=/opt/kubernetes/ssl \\
--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0"

EOF

参数说明：

--hostname-override 在集群中显示的主机名
--kubeconfig 指定kubeconfig文件位置，会自动生成
--bootstrap-kubeconfig 指定刚才生成的bootstrap.kubeconfig文件
--cert-dir 颁发证书存放位置
--pod-infra-container-image 管理Pod网络的镜像

其中/opt/kubernetes/cfg/kubelet.config配置文件如下：

cat </opt/kubernetes/cfg/kubelet.config

kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 192.168.1.30 
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS:
- 10.0.0.2
clusterDomain: cluster.local.
failSwapOn: false
authentication:
  anonymous:
    enabled: true
EOF

systemd管理kubelet组件：

cat </usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kubelet
ExecStart=/opt/kubernetes/bin/kubelet \$KUBELET_OPTS
Restart=on-failure
KillMode=process

[Install]
WantedBy=multi-user.target
EOF

启动：

# systemctl daemon-reload && systemctl enable kubelet && systemctl restart kubelet
# ps -ef | grep kubelet

在Master审批Node加入集群：启动后还没加入到集群中，需要手动允许该节点才可以。在Master节点查看请求签名的Node：

# kubectl get csr
# kubectl certificate approve XXXXID
# kubectl get node

`5.4部署kube-proxy组件`

创建kube-proxy配置文件：

cat </opt/kubernetes/cfg/kube-proxy

KUBE_PROXY_OPTS="--logtostderr=true \\
--v=4 \\
--hostname-override=192.168.1.30 \\
--cluster-cidr=10.0.0.0/24 \\
--proxy-mode=ipvs \\
--masquerade-all=true \\
--kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig"

EOF

systemd管理kube-proxy组件：

cat </usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Proxy
After=network.target

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-proxy
ExecStart=/opt/kubernetes/bin/kube-proxy \$KUBE_PROXY_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

启动：

# systemctl daemon-reload && systemctl enable kube-proxy && systemctl restart kube-proxy
# ps -ef | grep kube-proxy

拷贝配置文件到其他node：

配置文件：
# scp -r /opt/kubernetes/ root@192.168.1.51:/opt/
systemd管理文件：
# scp /usr/lib/systemd/system/{kubelet,kube-proxy}.service root@192.168.1.51:/usr/lib/systemd/system/
删除ssl文件（master颁发）：
# rm -f /opt/kubernetes/ssl/*
修改配置文件(节点ip)：
# cd /opt/kubernetes/cfg
    kubelet，kubelet.config，kube-proxy，

启动：

# systemctl daemon-reload && systemctl enable kube-proxy && systemctl restart kube-proxy
# ps -ef | grep kube-proxy
# systemctl daemon-reload && systemctl enable kubelet && systemctl restart kubelet
# ps -ef | grep kubelet

在Master审批Node加入集群：启动后还没加入到集群中，需要手动允许该节点才可以。在Master节点查看请求签名的Node：

# kubectl get csr
# kubectl certificate approve XXXXID
# kubectl get node

`6.查看集群状态`

# kubectl get node
NAME           STATUS   ROLES    AGE   VERSION
192.168.1.30   Ready       14h   v1.12.7
192.168.1.51   Ready       23s   v1.12.7

# kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
scheduler            Healthy   ok                  
etcd-1               Healthy   {"health":"true"}   
etcd-2               Healthy   {"health":"true"}   
etcd-0               Healthy   {"health":"true"}

至此单master搭建完毕，下面拓展多master

`7.master02部署`

拷贝所有组件到master02：
# scp -r /opt/kubernetes/ root@192.168.1.63:/opt
拷贝systemd文件拷贝：
# scp /usr/lib/systemd/system/{kube-apiserver,kube-controller-manager,kube-scheduler}.service root@192.168.1.63:/usr/lib/systemd/system/
拷贝etcd文件：
# scp -r /opt/etcd/ root@192.168.1.63:/opt/
修改apiserver地址（address）：
# vi /opt/kubernetes/cfg/kube-apiserver

启动：

启动kube-apiserver：
# systemctl daemon-reload && systemctl enable kube-apiserver && systemctl restart kube-apiserver
启动kube-scheduler：
# systemctl daemon-reload  && systemctl enable kube-scheduler && systemctl restart kube-scheduler
启动kube-controller-manager：
# systemctl daemon-reload && systemctl enable kube-controller-manager && systemctl restart kube-controller-manager
查看三个组件启动：
#ps -ef | grep kube

查看集群状态：

设置kubectl环境变量：
# vi /etc/profile
# export PATH=$PATH:/opt/kubernetes/bin/
# source /etc/profile

# kubectl get node
NAME           STATUS   ROLES    AGE   VERSION
192.168.1.30   Ready       15h   v1.12.7
192.168.1.51   Ready       53m   v1.12.7
# kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
scheduler            Healthy   ok                  
etcd-0               Healthy   {"health":"true"}   
etcd-1               Healthy   {"health":"true"}   
etcd-2               Healthy   {"health":"true"}

`8.Load Balancer 部署`

`8.1部署nginx`

nginx-master：

配置源：
# vim /etc/yum.repos.d/nginx.repo
[nginx]
name=nginx repo
baseurl=http://nginx.org/packages/centos/7/$basearch/
gpgcheck=0
安装nginx：
# yum -y install nginx
添加L4负载均衡：
# vim /etc/nginx/nginx.conf
stream {

   log_format  main  '$remote_addr $upstream_addr - [$time_local] $status $upstream_bytes_sent';
    access_log  /var/log/nginx/k8s-access.log  main;

    upstream k8s-apiserver {
        server 192.168.1.43:6443;
        server 192.168.1.63:6443;
    }
    server {
                listen 6443;
                proxy_pass k8s-apiserver;
    }
    }

启动：

关闭selinux：
# setenforce 0
# vi /etc/selinux/config
将SELINUX=enforcing改为SELINUX=disabled

#systemctl start nginx
# netstat -anpt | grep 6443

# echo "master" > /usr/share/nginx/html/index.html

nginx-backup：

配置源：
# vim /etc/yum.repos.d/nginx.repo
[nginx]
name=nginx repo
baseurl=http://nginx.org/packages/centos/7/$basearch/
gpgcheck=0
安装nginx：
# yum -y install nginx

拷贝到backup：
# scp /etc/nginx/nginx.conf root@192.168.1.31:/etc/nginx/

关闭selinux：
# setenforce 0
# vi /etc/selinux/config
将SELINUX=enforcing改为SELINUX=disabled

#systemctl start nginx
# netstat -anpt | grep 6443

# echo "backup" > /usr/share/nginx/html/index.html

`8.2部署keepalived`

master和backup安装keeplived：

# yum -y install keepalived

master的keeplived配置文件：

# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   # 接收邮件地址
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   # 邮件发送地址
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id NGINX_MASTER
}

vrrp_script check_nginx {
    script "/etc/nginx/check_nginx.sh"
}

vrrp_instance VI_1 {
    state MASTER
    interface ens32
    virtual_router_id 51 # VRRP 路由 ID实例，每个实例是唯一的
    priority 100    # 优先级，备服务器设置 90
    advert_int 1    # 指定VRRP 心跳包通告间隔时间，默认1秒
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.1.230/24
    }
    track_script {
        check_nginx
    }
}

backup的keeplived配置文件：

! Configuration File for keepalived 

global_defs { 
   # 接收邮件地址 
   notification_email { 
     acassen@firewall.loc 
     failover@firewall.loc 
     sysadmin@firewall.loc 
   } 
   # 邮件发送地址 
   notification_email_from Alexandre.Cassen@firewall.loc  
   smtp_server 127.0.0.1 
   smtp_connect_timeout 30 
   router_id NGINX_BACKUP
} 

vrrp_script check_nginx {
    script "/etc/nginx/check_nginx.sh"
}

vrrp_instance VI_1 { 
    state BACKUP
    interface ens32
    virtual_router_id 51 # VRRP 路由 ID实例，每个实例是唯一的 
    priority 90    # 优先级，备服务器设置 90 
    advert_int 1    # 指定VRRP 心跳包通告间隔时间，默认1秒 
    authentication { 
        auth_type PASS      
        auth_pass 1111 
    }  
    virtual_ipaddress { 
        192.168.1.230/24 
    } 
    track_script {
        check_nginx
    } 
}

nginx检查脚本：

# vim /etc/nginx/check_nginx.sh
count=$(ps -ef |grep nginx |egrep -cv "grep|$$")

if [ "$count" -eq 0 ];then
    systemctl stop keepalived
fi

启动：

# systemctl start keepalived
关闭master的nginx进行测试：
# systemctl stop nginx

`9.修改node节点apiserver为负载均衡ip`

# cd /opt/kubernetes/cfg
# vi bootstrap.kubeconfig
# vi kubelet.kubeconfig
# vi kube-proxy.kubeconfig

# systemctl restart kubelet
# systemctl restart kube-proxy

`10.运行一个测试示例`

`10.1授权kubelet：`

kubectl create clusterrolebinding system:anonymous --clusterrole=cluster-admin --user=system:anonymous

`10.2创建一个Nginx Web，测试集群是否正常工作：`

# kubectl run nginx --image=nginx --replicas=3
# kubectl expose deployment nginx --port=88 --target-port=80 --type=NodePort

查看Pod，Service：

# kubectl get pod
NAME                    READY   STATUS    RESTARTS   AGE
nginx-dbddb74b8-j4bjq   1/1     Running   0          19m
nginx-dbddb74b8-kpqht   1/1     Running   0          19m
nginx-dbddb74b8-xjn5k   1/1     Running   0          19m
# kubectl get svc
NAME         TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)        AGE
kubernetes   ClusterIP   10.0.0.1             443/TCP        16h
nginx        NodePort    10.0.0.33            88:32694/TCP   20m

`11.部署Web UI（Dashboard）`

地址：https://github.com/kubernetes/kubernetes/tree/master/cluster/addons/dashboard

# cd /k8s/Dashboard
# ls
    dashboard-configmap.yaml  dashboard-controller.yaml  dashboard-rbac.yaml  dashboard-secret.yaml  dashboard-service.yaml  k8s-admin.yaml
# kubectl apply -f .

# kubectl get pod,svc -o wide --all-namespaces | grep dashboard
kube-system   pod/kubernetes-dashboard-65f974f565-crvwj   1/1     Running   1          6m1s   172.17.75.2   192.168.1.30   
kube-system   service/kubernetes-dashboard   NodePort    10.0.0.192           443:30001/TCP   6m      k8s-app=kubernetes-dashboard

访问(尽量用火狐)：https://192.168.1.30:30001

查看token：

#  kubectl get secret --all-namespaces | grep dashboard
kube-system   dashboard-admin-token-nrvzx        kubernetes.io/service-account-token   3      9m16s
kube-system   kubernetes-dashboard-certs         Opaque                                0      9m17s
kube-system   kubernetes-dashboard-key-holder    Opaque                                2      9m17s
kube-system   kubernetes-dashboard-token-cqqm8   kubernetes.io/service-account-token   3      9m17s

# kubectl describe secret dashboard-admin-token-nrvzx -n kube-system

另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。

            

            网页题目：KubernetesV1.12二进制部署多Master-创新互联            

            标题网址：http://cdxtjz.com/article/gijeo.html


    
        其他资讯
        
            
                    导出mongodb里数据的方法
                

                    如何解决jquery有正确返回值但不执行success函数的问题
                

                    怎么在Java中实现闭包
                

                    怎么在vue项目中使用分页插件
                

                    Hyper-v环境下通过部署SCVMM进行物理机至虚拟机的转换