189 8069 5689
CentOS中怎么扩容虚拟机根分区磁盘，针对这个问题，这篇文章详细介绍了相对应的分析和解答，希望可以帮助更多想解决这个问题的小伙伴找到更简单易行的方法。
创新互联服务项目包括甘谷网站建设、甘谷网站制作、甘谷网页制作以及甘谷网络营销策划等。多年来，我们专注于互联网行业，利用自身积累的技术优势、行业经验、深度合作伙伴关系等，向广大中小型企业、政府机构等提供互联网行业的解决方案，甘谷网站推广取得了明显的社会效益与经济效益。目前，我们服务的客户以成都为中心已经辐射到甘谷省份的部分城市，未来相信会继续扩大服务区域并继续获得客户的支持与信任！
一、关闭你的虚拟机系统
查看镜像大小
qemu-img info test.img
给虚拟机镜像扩容40G
dd if =/dev/zero bs=1024M count=40 >>test.img
使用qemu-img info再看看镜像大小
二、启动虚拟机使用linux下的fdisk工具进行分区
用root用户登录到你的linux系统，查看你系统的分区
# fdisk -l
Disk /dev/sda: 64.4 GB, 64424509440 bytes
255 heads, 63 sectors/track, 7832 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00008d26
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 2611 20458496 8e Linux LVM
Disk /dev/mapper/VolGroup-lv_root: 18.9 GB, 18865979392 bytes
255 heads, 63 sectors/track, 2293 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 2080 MB, 2080374784 bytes
255 heads, 63 sectors/track, 252 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
根据提示信息可以判断出此系统的磁盘接口为SCSI，对应“sda”如果上面的红色字体是“hda”，那么此系统的磁盘接口为IDE对应“hda”所以我做一下操作：
# fdisk /dev/sda
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m //列出fdisk的帮助
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n //命令n用于添加新分区
Command action
e extended
p primary partition (1-4)
p //选择创建主分区"此时
Partition number (1-4): 3 //fdisk会让你选择主分区的编号，如果已经有了主分区sda1，sda2，那么编号就选3，即要创建的该分区为sda3
First cylinder (2611-7832, default 2611): //此时，fdisk又会让你选择该分区的开始值这个就是分区的Start 值（start cylinder）；这里最好直接按回车
Using default value 2611
Last cylinder, +cylinders or +size{K,M,G} (2611-7832, default 7832): //此时，fdisk又会让你选择该分区的开始值这个就是分区的End 值这里最好直接按回车
Using default value 7832
Command (m for help): w //保存所有并退出，分区划分完毕
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
三、我们的新建分区/dev/sda3，却不是LVM的。所以，接下来使用fdisk将其改成LVM的
# fdisk /dev/sda
Command (m for help): m
Command (m for help): t //改变分区系统id
Partition number (1-4): 3 //指定分区号
Hex code (type L to list codes): 8e //指定要改成的id号，8e代表LVM
Changed system type of partition 3 to 8e (Linux LVM)
Command (m for help): w
四、重启系统后，登陆系统。（一定要重启系统，否则无法扩充新分区）
五、格式化该新添加的分区
# fdisk -l
Disk /dev/sda: 64.4 GB, 64424509440 bytes
255 heads, 63 sectors/track, 7832 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00008d26
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 2611 20458496 8e Linux LVM
/dev/sda3 2611 7832 41939020 8e Linux LVM
Disk /dev/mapper/VolGroup-lv_root: 18.9 GB, 18865979392 bytes
255 heads, 63 sectors/track, 2293 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 2080 MB, 2080374784 bytes
255 heads, 63 sectors/track, 252 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
你会发现多了一块分区
# mkfs -t ext3 /dev/sda3 //在硬盘分区“/dev/sda3”上创建“ext3”文件系统
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
2621440 inodes, 10484755 blocks
524237 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
320 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
此时我们就可以使用该新增分区啦：
六、扩充新分区
# lvs
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert
lv_root VolGroup -wi-ao---- 17.57g
lv_swap VolGroup -wi-ao---- 1.94g
# pvcreate /dev/sda3
Physical volume "/dev/sda3" successfully created
# pvcreate /dev/sda3 //pvcreate指令用于将物理硬盘分区初始化为物理卷，以便被LVM使用。要创建物理卷必须首先对硬盘进行分区，并且将硬盘分区的类型设置为“8e”后，才能使用pvcreat指令将分区初始化为物理卷
Physical volume "/dev/sda3" successfully created
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root 18G 1.7G 15G 10% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 485M 32M 428M 7% /boot
# vgextend /dev/mapper/VolGroup-lv_root /dev/sda3 //其中是当前需要扩充的lvm组名，可以通过df -h查看，例如我的是： /dev/mapper/VolGroup-lv_root） //vgextend指令用于动态的扩展卷组，它通过向卷组中添加物理卷来增加卷组的容量
Volume group name VolGroup/lv_root has invalid characters
# vgextend /dev/mapper/VolGroup /dev/sda3 //原来这个组名，是-之前的字符串——这要是没有文章看着对比分析，谁知道啊？
Volume group "VolGroup" successfully extended
#vgdisplay //用于显示LNM卷组的元数据信息
--- Volume group ---
VG Name VolGroup
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 2
Act PV 2
VG Size 59.50 GiB
PE Size 4.00 MiB
Total PE 15232
Alloc PE / Size 4994 / 19.51 GiB
Free PE / Size 10238 / 39.99 GiB
VG UUID Ecv3ml-86eg-LTsH-mALD-mLxW-v3Ao-GEqiFc
(主要查看Free PE / Size 10238 / 39.99 GiB，说明我们最多可以有39.99GB的扩充空间。我一般选择小于等于39.99GB)
# lvextend -L +39.99G /dev/VolGroup/lv_root /dev/sda3
Rounding size to boundary between physical extents: 39.99 GiB
Extending logical volume lv_root to 57.56 GiB
Logical volume lv_root successfully resized
# e2fsck -f /dev/VolGroup/lv_root
e2fsck 1.41.12 (17-May-2010)
/dev/VolGroup/lv_root is mounted.
e2fsck: Cannot continue, aborting.
# resize2fs /dev/VolGroup/lv_root（如果这一步报错了改用xfs_growfs/dev/VolGroup/lv_root原因据说是xfs文件系统）
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev/VolGroup/lv_root is mounted on /; on-line resizing required
old desc_blocks = 2, new_desc_blocks = 4
Performing an on-line resize of /dev/VolGroup/lv_root to 15089664 (4k) blocks.
The filesystem on /dev/VolGroup/lv_root is now 15089664 blocks long.
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root 57G 1.7G 53G 3% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 485M 32M 428M 7% /boot
关于CentOS中怎么扩容虚拟机根分区磁盘问题的解答就分享到这里了，希望以上内容可以对大家有一定的帮助，如果你还有很多疑惑没有解开，可以关注创新互联行业资讯频道了解更多相关知识。