189 8069 5689
[EX/QFX] Wildcard range commands for EX switches
成都创新互联公司专业为企业提供瑞安网站建设、瑞安做网站、瑞安网站设计、瑞安网站制作等企业网站建设、网页设计与制作、瑞安企业网站模板建站服务，10多年瑞安做网站经验，不只是建网站，更提供有价值的思路和整体网络服务。
[KB23789] Show KB Properties
SUMMARY:
This article provides information about the wildcard range commands for EX switches.
PROBLEM OR GOAL:
The wildcard range option enables you to configure multiple interface configuration statements by using a single set command; instead of configuring each of them individually for interfaces. The range option with the wildcard command enables you to specify ranges in activate, deactivate, delete, protect, set, show, and unprotect commands.
CAUSE:
SOLUTION:
VLAN output before applying configuration:
{master:0}[edit]
root@dnd-26-plz# run show vlans
Name Tag Interfaces
default ge-0/0/5.0, ge-0/0/6.0, ge-0/0/7.0, ge-0/0/8.0,
ge-0/0/9.0, ge-0/0/11.0, ge-0/0/12.0, ge-0/0/13.0,
ge-0/0/14.0, ge-0/0/15.0, ge-0/0/16.0, ge-0/0/17.0,
ge-0/0/18.0, ge-0/0/19.0, ge-0/0/20.0, ge-0/0/21.0,
ge-0/0/22.0, ge-0/0/23.0, ge-0/0/24.0, ge-0/0/25.0,
ge-0/0/26.0, ge-0/0/27.0, ge-0/0/28.0, ge-0/0/29.0,
ge-0/0/30.0, ge-0/0/31.0, ge-0/0/32.0, ge-0/0/33.0,
ge-0/0/34.0, ge-0/0/35.0, ge-0/0/36.0, ge-0/0/37.0,
ge-0/0/38.0, ge-0/0/39.0, ge-0/0/40.0, ge-0/0/41.0,
ge-0/0/42.0, ge-0/0/43.0, ge-0/0/44.0, ge-0/0/45.0,
ge-0/0/46.0, ge-0/0/47.0
tes110 110 ge-0/0/1.0
test100 100 ge-0/0/0.0
test127 127 ge-0/0/2.0
test254 254 ge-0/0/3.0, ge-0/0/4.0, ge-0/0/10.0
v500 500 None
Command issued to add a group of interfaces to a VLAN:
root@dnd-26-plz# wildcard range set interfaces ge-0/0/[11-13,16,23,45] unit 0 family ethernet-switching vlan members v500
VLAN output after applying the configuration:
{master:0}[edit]
root@dnd-26-plz# run show vlans
Name Tag Interfaces
default ge-0/0/5.0, ge-0/0/6.0, ge-0/0/7.0, ge-0/0/8.0, ge-0/0/9.0, ge-0/0/14.0, ge-0/0/15.0, ge-0/0/17.0, ge-0/0/18.0, ge-0/0/19.0,
ge-0/0/20.0, ge-0/0/21.0, ge-0/0/22.0, ge-0/0/24.0, ge-0/0/25.0, ge-0/0/26.0, ge-0/0/27.0, ge-0/0/28.0, ge-0/0/29.0, ge-0/0/30.0,
ge-0/0/31.0, ge-0/0/32.0, ge-0/0/33.0, ge-0/0/34.0, ge-0/0/35.0, ge-0/0/36.0, ge-0/0/37.0, ge-0/0/38.0, ge-0/0/39.0, ge-0/0/40.0,
ge-0/0/41.0, ge-0/0/42.0, ge-0/0/43.0, ge-0/0/44.0, ge-0/0/46.0, ge-0/0/47.0
tes110 110 ge-0/0/1.0
test100 100 ge-0/0/0.0
test127 127 ge-0/0/2.0
test254 254 ge-0/0/3.0, ge-0/0/4.0, ge-0/0/10.0
v500 500 ge-0/0/11.0, ge-0/0/12.0, ge-0/0/13.0, ge-0/0/16.0, ge-0/0/23.0, ge-0/0/45.0
//下面的配置效果和上面的一样
The end result is that the same configuration is applied to all of the above interfaces:
root@dnd-26-plz# set interfaces ge-0/0/11 unit 0 family ethernet-switching vlan members v500
root@dnd-26-plz# set interfaces ge-0/0/12 unit 0 family ethernet-switching vlan members v500
root@dnd-26-plz# set interfaces ge-0/0/13 unit 0 family ethernet-switching vlan members v500
root@dnd-26-plz# set interfaces ge-0/0/16 unit 0 family ethernet-switching vlan members v500
root@dnd-26-plz# set interfaces ge-0/0/23 unit 0 family ethernet-switching vlan members v500
root@dnd-26-plz# set interfaces ge-0/0/45 unit 0 family ethernet-switching vlan members v500
The same can be used for the following purposes - active, deactivate, delete, protect, set, show, and unprotect configuration commands.
This new option is documented in the Release Notes (including the link). For more information, refer to the following configuration example:
http://www.juniper.net/techpubs/en_US/junos/topics/example/junos-cli-wildcard-range-configuring.html
PURPOSE:
Configuration
Implementation
RELATED LINKS: